CORTEN GARDEN WALL 450MM TALL ASSEMBLY

Corten Retaining 450mm Instructions

450MM TALL CORTEN PANELS ARE SCREWED TOGETHER USING SS TEK SCREWS

Support posts are installed between straight panels for stability

450mm tall corten wall parts prices

Front of Corten Panels

All corten is supplied as unweathered blue steel, and oxidises over time, with exposure to the elements.

Set Corten angle posts

All corten is supplied as unweathered blue steel, and oxidises over time, with exposure to the elements.

Corten wall ready

All corten is supplied as unweathered blue steel, and oxidises over time, with exposure to the elements.

Corten Panels screwed together with SS TEK screws

3mm Corten Angle Post TEK screwed to panels

Pre drilled pilot holes

All corten panels, posts, and joining pieces have pre drilled pilot holes

All corten is supplied as unweathered blue steel, and oxidises over time, with exposure to the elements.

Posts are placed between straight panel sections

All posts have pre-drilled pilot holes, matching the corten pilot holes

This makes assembly with stainless steel TEK screws quick and easy

Our helpful tutorials

Posts in pile holes

Tools needed

5/16th” (7.9mm) Nut driver Variable speed drill G clamps Ratchet spanner Tape measure Drill extension bar (optional)

3mm thick posts are placed between straight panel sections

Angle post lengths

597mm 747mm 800mm 897mm 1197mm

Post embedment is half post length Select post length based on soil type and loads on wall, Soft soils with full height retaining, should use the longest post option, which provides the most stability If the ground behind the wall is supporting a driveway or other surcharge loads, the post spacings should be decreased (add more posts) and the post lengths increased Drainage must be installed behind all retaining walls