CORTEN GARDEN WALL 750MM TALL ASSEMBLY
Corten Retaining 750mm Instructions
750MM TALL CORTEN PANELS ARE SCREWED TOGETHER USING SS TEK SCREWS
Support posts are installed between straight panels for stability
Corten Angle Posts
Corten oxidises over time.
Corten Wall Panels
Corten oxidises over time.
Corten Steel Panels
Corten oxidises over time.
Corten Panels with SS TEK screws
3mm Corten Angle Post TEK screwed to panels
Pre drilled pilot holes
All panels, posts, and pieces have pre drilled holes
Unweathered blue steel
Corten oxidises over time
Posts between panel sections
Posts have matching pilot holes
Posts set in concrete
Tools needed
Capping Installation
Variable speed drill G clamps Ratchet spanner
Tools for Assembly
5/16th” (7.9mm) Nut driver Tape measure Drill extension bar
Angle post lengths
160 x 53 x 3mm posts are placed between straight panel sections
800mm 897mm 1197mm 1497mm
Post embedment is half post length Select post length based on soil type and loads on wall, Soft soils with full height retaining, should use the longest post option, which provides the most stability If the ground behind the wall is supporting a driveway or other surcharge loads, the panel lengths should be shortened and the post lengths increased Drainage must be installed behind all retaining walls
PARTS LIST – ALL 750MM TALL
Not sure what you need?
Just email us a pic and a sketch, we should then be able to get back to you with a suggested corten layout .
[email protected]
Corten Steel Panels
Our panels for your next project.
Straight Panel Lengths
600mm x 600mm
1200mm
External 90deg corners
450mm x 450mm
600mm
External 45deg corners
600mm x 600mm
900mm
External 90deg quarter curve
450mm radius 900mm radius
1500mm
Corten capping can be added to the wall
Modern Garden
Modern garden using corten steel retaining walls
Modern Garden
Modern garden using corten steel retaining walls
Modern Garden
Modern garden using corten steel retaining walls
All corten walls must have drainage to relieve hydrostatic pressure
